Linear Irrigation Pivot for Sale
For large areas of planting, the linear irrigation system is probably the most recommended because it does not require much movement of the agricultural equipment since it allows to cover a great extent in a completely automated way through GPS systems of easy implementation. Soil compaction, when the linear pivot is used, is usually smaller than that of a towable pivot, which has a circular extension area, as this demands greater movement. In addition, to cover the corners, the circular pivot demands accessories, since the linear pivot does this, of course, naturally, without the installation of other accessories for irrigation systems.
Bids for Linear Pivot
The movable towers of the sprinkler system are what, together with the system of trusses, sleepers and shoes, supports the throws. It is through these, that are arched steel structures, through which the water passes that will effectively irrigate the crop. In the case of the linear pivot, the area that this can cover, depends on the moving space of the could be called length and width. And this width is represented by the number of bids installed in the linear pivot. The more bids mounted on the linear pivot, the greater will be the planting area of the rural property that it has the ability to cover.
6 5/8 “or 8 5/8” are the most common diameters of bids that can be coupled to the linear pivot. In addition, the height of this can also vary: 2.7 meters represents the standard size and 3.7 meters, is generally considered as a high bid, used to irrigate cultivars that require greater height spacing between the root and top of the plant. A pitch range usually has 6 meters, which in many cases are slotted eight by eight or seven by seven, covering an extension of 48 to 54 meters. However, the number of bids for a recommended irrigation system to avoid further demands for maintenance of the engine in the irrigation system is 22 per group, also called the system, resulting in a final width of 1260 meters, since the maximum number of suggested groups for smooth running of the linear pivot is 58 per equipment.
Linear Pivot Alignment
Like a normal automotive car, where there is also a two-wheel axle, the linear pivot obviously needs to be aligned so that one wheel does not ride faster than the other, both having the same speed. This is only possible with parts that are not warped, allowing good alignment of the linear pivot for a movement, along with the area of planting to be irrigated, with precision.
Linear Pivot Feeding System
The water from the irrigation channel to be used by the central pivot feed system is trapezoidal in shape with a maximum of 80 centimetres in height to meet the demand of the suction pipe. The canal can be covered with concrete or wine blanket to reduce the demand for maintenance of this. It can be lateral to the area of the linear or central pivot, which, by means of a rectilinear ditch, will feed the irrigation system by sprinkler used.
The area and volume of the water stream dictate how the linear irrigation project should be. The pumping should be done by means of the source that is nearer, having the water taken by an adductor to the disperser.